WE MAKE ALL OF OUR OWN TABS, BUNGS, SPACERS, AND WASHERS IN HOUSE. IF YOU DO NOT SEE SOMETHING YOU NEED OR WANT A CUSTOM TAB GIVE US A CALL OR EMAIL US AT firstname.lastname@example.org
Designed specifically for the Group 34 or 78 Optima Bluetop, Redtop, or Yellowtop batteries. These fully weldable battery boxes can be placed anywhere on a car and will hold your battery in place without breaking loose. Using four bolts, the top strap...
WC Dual Optima battery tray. This tray was designed to be lightweight and have superior strength. Laser cut out of 14 gauge steel, CNC bent and Tig welded construction. This tray can be bolted in with 1/4" bolts or welded on to your chassis. Wicked...
Our number one seller, for a reason. We designed a skid and mount for the most popular jack in the desert.
The skid, is lightweight aluminum, laser cut and mounts directly to the Harbor Freight aluminum racing jacks. It allows the jack to slide over...
WC aluminum floor jack skid plate. This skid plate is CAD designed, laser cut and CNC bent out of premium 1/8" aluminum. These fit the Harbor Freight aluminum racing jacks. These are perfect for skidding across roack and sand. Light weright and very...
WC bolt on or weld on Harbor Freight floor jack mount. This item must be used with our Harbor Freight aluminum jack skid plates. You can easily bolt this mount in or weld it on your vehicle or trailer. Quick pull pin release makes getting the jack out...
Odyssey PC925 Single Battery Tray. Steel battery tray can be bolted or welded to your project. Securly and safely holds a single Odyssey PC925 battery. 4 bolt clamp design makes battery removal easy. Designed, laser cut, and formed in the USA.
8" in length
Length is measured from the center of each eye bolt
7,000 lb Nylon webbing double wrapped over each buckle
10,000 lb 4130 Chromoly buckle with HD internal deflector
Massive "346" Series thread
Stretch is 1" per 12" of...
When your axle stock shock mounts just wont live up to your build, use these 3/16 thick laser cut and CNC bent shock mounts. These mounts come with 1 1/2" spacing, 3 1/4" tube radius, and 1/2 bolt hole. Kit comes with (2) weld on brackets.
(4) 2.5 bearings
(2) Hubcentric Cap
(4) 2.5 races (installed)
5/8 Heat treated race studs (except 5 x 150mm Hubs)
(2) Billet hubs
(2) rotor adapter
(2) 2.5 seals
All hardware and O-rings
Made in-house in the USA
YOU WILL NEED TO PURCHASE...
WC 1" Wide billet sway bar arms are 19" center of torsion to end of arm. They take a 1 1/4 x 48 spline torsion bar and include the pinch bolts and nuts. These arms require you to make your own heim mounts. Sold as a pair
WC 1" Wide billet sway bar arms are 17" center of torsion to end of arm. They take a 1 1/4 x 48 spline torsion bar and include the pinch bolts and nuts. These are the arms we run on our Canatliver kits. They also have a additional mounting hole on the...
WC 2" Wide billet sway bar arms are 26" center of torsion to end of bar. This three hole design lets you create a mount for the heim that is exactly where you need it. They take a 1 1/4 x 48 spline torsion bar and include the pinch bolts and nuts...
WC 2" Wide billet sway bar arms are 24" center of torsion to center of heim. They take a 1 1/4 x 48 spline torsion bar and include the pinch bolts and nuts. Sold as a pair.
Can-Am Owners, this clamp is 2 1/2" ID 3" OD, this means it a perfect clamp for the big tube behind the rear seats. Perfect for mounting your spare tire onto, or any toher accessory. Machined from 4130 bar and tig welded brackets. Clamp also comes with...
If you have a Toyota you know the struggle of the upper control arm bolt. These weld on billet brackets are made to eliminate that problem. These brackets use (2) 1/2 bolts and nuts and have a 2" spread for a rod end spacer. This is a must for easy...
WC weld on mirror bracket are made from 1/4" (.250) steel. Sold individually
Use these USA made tie down tabs to securly mount movable items to your vehicle. Laser cut out of 1/4 thick steel.
Wicked Creations fuel cell cradles are designed and made out of 1/8" steel construction. Parts include cradel and (2) cradle sides. Welding is required as all parts come serperate. This are for Fuel Safes truck fuel cells.
Fits these Fuel Safe Cells
Weld this Bracket to your suspesnion or chassis of your vehicle. It allows a rachet strap hook to securly hook onto this bracket to ensure you have a perfect tie down point. Laser cut in the USA out of 1/4 steel.
Use these laser cut plates to make mounts for your LS based engine. These are made in the USA out of 1/4" steel. Sold as a pair
© 2023 Wicked Creations
All rights reserved.