null
24 of 28 Items
  • WC Optima Battery Tray WC Optima Battery Tray WC Optima Battery Tray WC Optima Battery Tray

    WC Optima Battery Tray

    Designed specifically for the Group 34 or 78 Optima Bluetop, Redtop, or Yellowtop batteries. These fully weldable battery boxes can be placed anywhere on a car and will hold your battery in place without breaking loose. Using four bolts, the top strap...

    $50.00
  • WC Optima Dual Long Battery Tray WC Optima Dual Long Battery Tray

    WC Optima Dual Long Battery Tray

    WC Dual Optima battery tray. This tray was designed to be lightweight and have superior strength. Laser cut out of 14 gauge steel, CNC bent and Tig welded construction. This tray can be bolted in with 1/4" bolts or welded on to your chassis. Wicked...

    $90.00
  • WC Dual Back to Back Optima Tray WC Dual Back to Back Optima Tray WC Dual Back to Back Optima Tray

    WC Dual Back to Back Optima Tray

    WC Dual Optima battery tray. This tray was designed to be lightweight and have superior strength. Laser cut out of 14 gauge steel, CNC bent and Tig welded construction. This tray can be bolted in with 1/4" bolts or welded on to your chassis. Wicked...

    $90.00
  • WC Jack Skid and Mount Combo WC Jack Skid and Mount Combo WC Jack Skid and Mount Combo

    WC Jack Skid and Mount Combo

    Our number one seller, for a reason. We designed a skid and mount for the most popular jack in the desert. The skid, is lightweight aluminum, laser cut and mounts directly to the Harbor Freight aluminum racing jacks. It allows the jack to slide over...

    $175.00 - $275.00
  • WC Aluminum Jack Skid Plate

    WC Aluminum Jack Skid Plate

    WC aluminum floor jack skid plate. This skid plate is CAD designed, laser cut and CNC bent out of premium 1/8" aluminum. These fit the Harbor Freight aluminum racing jacks. These are perfect for skidding across roack and sand. Light weright and very...

    $75.00 - $125.00
  • WC Jack Mount

    WC Jack Mount

    WC bolt on or weld on Harbor Freight floor jack mount. This item must be used with our Harbor Freight aluminum jack skid plates. You can easily bolt this mount in or weld it on your vehicle or trailer. Quick pull pin release makes getting the jack out...

    $85.00 - $130.00
  • WC Odyssey PC925 Battery Tray WC Odyssey PC925 Battery Tray

    WC Odyssey PC925 Battery Tray

    Odyssey PC925 Single Battery Tray. Steel battery tray can be bolted or welded to your project. Securly and safely holds a single Odyssey PC925 battery. 4 bolt clamp design makes battery removal easy. Designed, laser cut, and formed in the USA.

    $50.00
  • WC 2.50 FRONT HUB KIT WC 2.50 FRONT HUB KIT WC 2.50 FRONT HUB KIT

    WC 2.50 FRONT HUB KIT

    Whats included (4) 2.5 bearings (2) Hubcentric Cap (4) 2.5 races (installed) 5/8 Heat treated race studs (except 5 x 150mm Hubs) (2) Billet hubs (2) rotor adapter (2) 2.5 seals All hardware and O-rings Made in-house in the USA YOU WILL NEED TO PURCHASE...

    $1,950.00 - $2,400.00
  • WC Billet Sway Bar Arms - S3

    WC 1" Wide billet sway bar arms are 19" center of torsion to end of arm. They take a 1 1/4 x 48 spline torsion bar and include the pinch bolts and nuts. These arms require you to make your own heim mounts. Sold as a pair

    $400.00
  • WC Billet Sway Bar Arms - S WC Billet Sway Bar Arms - S

    WC Billet Sway Bar Arms - S

    WC 1" Wide billet sway bar arms are 17" center of torsion to end of arm. They take a 1 1/4 x 48 spline torsion bar and include the pinch bolts and nuts. These are the arms we run on our Canatliver kits. They also have a additional mounting hole on the...

    $400.00
  • WC Billet Sway Bar Arms -C

    WC Billet Sway Bar Arms -C

    WC 2" Wide billet sway bar arms are 26" center of torsion to end of bar.  This three hole design lets you create a mount for the heim that is exactly where you need it. They take a 1 1/4 x 48 spline torsion bar and include the pinch bolts and nuts...

    $500.00
  • WC Billet Sway Bar Arms WC Billet Sway Bar Arms

    WC Billet Sway Bar Arms

    WC 2" Wide billet sway bar arms are 24" center of torsion to center of heim. They take a 1 1/4 x 48 spline torsion bar and include the pinch bolts and nuts. Sold as a pair.

    $500.00
  • 2  1/2" ID Clamp

    2 1/2" ID Clamp

    Can-Am Owners, this clamp is 2 1/2" ID 3" OD, this means it a perfect clamp for the big tube behind the rear seats. Perfect for mounting your spare tire onto, or any toher accessory. Machined from 4130 bar and tig welded brackets. Clamp also comes with...

    $30.00
  • Toyota Billet Upper Arm Mounts Toyota Billet Upper Arm Mounts Toyota Billet Upper Arm Mounts Toyota Billet Upper Arm Mounts Toyota Billet Upper Arm Mounts

    Toyota Billet Upper Arm Mounts

    If you have a Toyota you know the struggle of the upper control arm bolt. These weld on billet brackets are made to eliminate that problem. These brackets use (2) 1/2 bolts and nuts and have a 2" spread for a rod end spacer. This is a must for easy...

    $650.00
  • Fuel Safe Fuel Cell Cradle

    Fuel Safe Fuel Cell Cradle

    Wicked Creations fuel cell cradles are designed and made out of 1/8" steel construction. Parts include cradel and (2) cradle sides. Welding is required as all parts come serperate. This are for Fuel Safes truck fuel cells. Fits these Fuel Safe Cells 50...

    $350.00
  • WC 2.5 REAR HUB KIT WC 2.5 REAR HUB KIT WC 2.5 REAR HUB KIT

    WC 2.5 REAR HUB KIT

    Whats included (4) 2.5 bearings (2) 35 or 40 spline drive plates (2) Hubcentric cap (4) 2.5 races (installed) 5/8 Heat treated race studs (except 5 x 150mm Hubs) (2) Billet hubs (2) Rotor adapter (2) 2.5 seals All hardware and O-rings Made in-house in...

    $2,400.00 - $3,000.00
  • WC 5/8 x 18 Lug Nuts

    WC 5/8 x 18 Lug Nuts

    Wicked Creations Machined Lug Nuts, These lug nuts are made in-house right here in the USA. These have 5/8 x 18 thread, 60 deg taper, and are zink plated. They fit a 1" socket. These allow you to fully tighten your wheels without digging into your...

    $50.00 - $240.00
  • WC Billet Link Mounts WC Billet Link Mounts WC Billet Link Mounts WC Billet Link Mounts WC Billet Link Mounts

    WC Billet Link Mounts

    Wicked Creations 4130 Billet Lower Link Mounts. These link mounts are machined in house out of 3/4" thick 4130 plate. These are machined for either a 3.5" housing or a 4" housing. They have a 3/4" bolt hole and are 3/8" thick at the bolt hole. Also come...

    $450.00
  • 5" Round Mirror 5" Round Mirror 5" Round Mirror

    5" Round Mirror

    5" Round Black Mirror With Flat Mirror Glass. Durable Steel Backing Includes Built In Threaded Mounting Post.

    $15.25
  • Energy Suspension Urethane Bushing

    Energy Suspension Urethane Bushing

    This Energy Suspension Bushing is what we use in all of our Long Travel Kits. These have a outside measurment of 2" a 1/4" wall and a 1" hole through. These are sold per bushing. Example- One control arm willl require 4 bushings.

    $6.50
  • 99-2018 Chevy 1500 2WD 2"  Bolt On Hubs 99-2018 Chevy 1500 2WD 2"  Bolt On Hubs 99-2018 Chevy 1500 2WD 2"  Bolt On Hubs

    99-2018 Chevy 1500 2WD 2" Bolt On Hubs

    1999-2018 Chevy Silverado 1500 2WD bolt on hubs. These are a direct bolt on for the 3 bolt upright. This hub kit includes (2) front hubs, (2) bolt on 2" spindle snouts, (4) 2" bearings and races, (2) center caps, and all hardware. Calipers might have to...

    $1,450.00
  • Wicked Creations Lower Front Link Pivots Wicked Creations Lower Front Link Pivots Wicked Creations Lower Front Link Pivots Wicked Creations Lower Front Link Pivots Wicked Creations Lower Front Link Pivots

    Wicked Creations Lower Front Link Pivots

    Wicked Creations front truck trailing arm mounts. These mounts are CAD designed for superior strength and laser cut and CNC Bent. They come MIG welded, TIG welded or available in a WIY (weld it yourself) kit. The Trailing arm mounts consist of 3/16 steel...

    $150.00 - $300.00
  • Wicked Creations Upper Link Pivots

    Wicked Creations Upper Link Pivots

    Wicked Creations upper front link pivots. These are a universal link pivot, for a 3 link or 4 link application. Made of heavy duty 3/16 steel, these mounts can be either bolted on with 5/8 hardware or welded on to your chassis. These pivots are available...

    $150.00 - $300.00
24 of 28 Items